PACOM PDR16-PC, Руководство пользователя

Страница: 45 / 96

16-Channel Digital Video Recorder
39
2. ID displays the serial number of the record banks.
NOTE: The BANK is the basic unit for the database used by the DVR system.
3.
Recording Start Time
and
Recording End Time
display the recording beginning date/time and ending date/time
of each bank.
4.
Type
displays the type of record bank.
Normal
means time-lapse recording, and
PRExx
means the pre-event
recording.
5. Backup Status displays whether a target bank has already been backed up or not.
6. Select the bank to back up by clicking the target bank in the list box. Multiple banks can be selected by using the
Ctrl or Shift keys on the actual keyboard. Click each bank to be backed up while pressing and holding the Ctrl key.
If you want to select all banks in a specific range, click the first and last banks to be backed up within the range
while pressing and holding the Shift key.
7. The number of selected banks will be displayed in the Selected Banks box. The Free Backup Banks box
displays the number of banks that are available for backup.
8. Click the
Update
button to update the record bank information. After you have set up the Manual Backup by List,
click the OK button. Selecting Cancel exits the dialog box without saving the settings.
Setup
Click the
Setup ... button in the SmartBackup dialog box to set up the backup information. The following Setup
dialog box appears.
1. Move to
Auto-backup , and check the box to set up auto backup. If this box is checked, the DVR will back up
automatically according to the established auto backup settings. If
Auto-backup
is not selected, the DVR is in the
manual backup mode and follows the established manual backup settings. See the Manual Backup section for
setting up the manual backup.
2. Latest Backup Time shows the latest backup date and time.
3. Move to Period (time) , and set the backup beginning time in Start , and ending time in Finish using the arrow
buttons. If you set the value to 0 for the Start and to 24 for the Finish , the DVR will back up from 0:00 to 24:00 on
that day.
4. Move to
Destination
under the Backup Drive, and select a backup drive from the drop-down list.
NOTE: Active menus under the Backup Drive will vary depending on the type of media used.
5. Move to
Repeat , and check the box to recycle the backup drive. If the Repeat is not selected, the DVR stops
backing up when the drive is full.
6. Move to Auto Eject , and check the box to use the auto eject feature of backup drive if the drive is so equipped.
7. Click the Initialize ... button to initialize the backup space. The backup drive should be initialized before backing
up. Any bank contents stored on the drive will be deleted when you initialize the backup drive.