User’s Manual
6
NOTE:
If you click the
Power
button, the
Quit
dialog box appears. Select
System quit
to quit the program or
select
logout
to log out the system.
Click any function button on the main GUI of SmartGuard after logging out, the following
User Login
dialog box
appears. Enter the
User ID
and
Password
and then click the
OK
button if you want to log in the system.
NOTE:
When
No local login
is selected during SmartGuard – Authority setup, the DVR does not ask login
procedure.
Click the
Power
button on the main GUI of SmartGuard under login, the following
Quit
dialog box appears. Select
logout
and then click the
Yes
button if you want to log out the system.
Manual Alarm Output
: In general, the alarm is activated automatically when any related sensor is
activated. However, the user can activate alarm output manually by clicking the button while it is released or
deactivate
an alarm output by clicking the button when it is pressed.
Setup
: When this button is clicked, a dialog box appears. The dialog box has nine tabs. See the following
SmartGuard Setup
section.
Auto Sequencing
: When this button is clicked, the SmartGuard sequences the cameras in order. Whenever
you click the button, it toggles between On and Off. The switching interval can be set during the system
setup.
Mode Selection
: The record mode is selected when this button is clicked. SmartGuard returns to view only
mode automatically when it is unable to record (for example, when the hard disk is full).
NOTE:
The DVR records only in accordance with the recording schedule, which can be set during the system
setup. Before you install the DVR, you need to fully understand the recording schedule. Note also that clicking
this record button only prepares the DVR for recording. In this state, the DVR will follow the recording schedule.
Содержание PDR16-PC
Страница 1: ......
Страница 2: ...User s Manual ii ...
Страница 6: ...User s Manual vi ...
Страница 60: ...User s Manual 54 ...