Section 5
LABELING UNIT
-
13
-
English
F
412
0501
00.fm
ID
M
version:
Module 40/60/90/120
ADJUSTING THE PAPER-BRAKING PAD
Proceed as follows.
1 -Tighten the
screw
to increase the
braking force on the paper.
2 -Loosen the
screw
to reduce the
braking force on the paper.
ADJUSTING THE CLUTCH ON THE WINDER SPOOL
In the MODULE 40 version, the
revolving motion of the
winder spool
is
driven by the main motor by means of a
belt transmission with an adjustable
clutch control. To increase the tension
on the paper, proceed as shown on the
right.
1 -Tighten the knurled
knob
underneath the winder.
Important
Avoid pulling the paper too taut,
otherwise the motor could seize.
Tighten the knob if the paper is not
winding neatly onto the spool or if it
tends to form a variable (pulsing)
loop between the driving unit and
the spool.
IDM-41200600900.tif
screw
IDM-41200601000.tif
winder spool
knob