PackLab MODULE 120, Руководство пользователя

Страница: 25 / 48

Section 5
LABELING UNIT
- 17 -
English
F
412
0501
00.fm
ID
M
version:
Module 40/60/90/120
DESCRIPTION OF THE CONTROLS (VERS.60/90/120/40 KEYBOARD)
The labeling units for attaching self-
adhesive labels in the MODULE 60 and
MODULE 90 range are complete with a
terminal for controlling the machine
functions and setting the operating
parameters. The terminal comprises a
waterproof membrane keyboard and a
backlit LCD alphanumerical display,
and it is housed in a container separate
from the main switchboard.
It should be noted that there is a
general machine circuit-breaker on the
underside of the main switchboard,
while on the top there is a red light that
indicates when the machine is
powered.
Generally speaking, the function of the
keys is as follows (to facilitate
typesetting, the key with the arrow facing upwards will
be called the “UP” key, while the key with the arrow
facing downwards will be called the “DOWN” key in the
text that follows):
“RESET” key : enables the machine to be started
again after a stoppage due to an alarm condition, or
after a stoppage obtained by pressing the STOP key
“STOP” key : stops the machine, bringing it into pause
mode; to start the machine again, you have to press
the RESET key
“TEST” key : when the machine is in pause mode
(after pressing the STOP key), this key enables you to
deliver a single label
“A” key : pressed simultaneously with another key, it
enables you to obtain an alternative function. The
possible combinations are A+P, A+UP, A+DOWN,
A+TEST
“P” key : this is used to access the procedure for
setting the machine operating parameters associated
with a particular size of label and bottle
“UP” key : in the procedures requiring you to input a
number, the UP key increases the number in question
by one unit
“DOWN” key : in the procedures requiring you to input
a number, the DOWN key reduces the number in
question by one unit
“Enter” key : in the procedures requiring you to input a
number, the Enter key confirms the new setting.
“A + P” combination of keys : this is used to access
the procedure for setting the general machine
operating parameters unassociated with any particular
size of label and bottle
“A + UP” combination of keys : in the procedures
requiring you to input a number, this combination of
keys increases the number concerned by 10 or 100
units at a time
“A + DOWN” combination of keys : in the procedures
requiring you to input a number, this combination of
keys reduces the number concerned by 10 or 100 units
at a time
“A + TEST” combination of keys : this enables you to
view certain diagnostic information on the state of the
inputs and outputs.
OPERATING INSTRUCTIONS
IDM-41200603800.tif