Section 5
LABELING UNIT
-
29
-
English
F
412
0501
00.fm
ID
M
version:
Module 40/60/90/120
Danger - Warning
Maintenance operations shall be carried out by
specifically qualified personnel, who have been
trained for the purpose and possess the necessary
skills and experience according to the applicable
regulations. Maintenance operations shall be
carried out when the machine is not connected to
the power supply.
Important
Oxidation may damage the metallic parts and the
electrical equipment.
In order to protect the equipment during long periods
of non-operation, disconnect the power supply and
cover the machine with a cloth of an appropriate
material.
CLEANING OPERATIONS
– Cleaning and scheduled maintenance operations
are absolutely necessary to obtain correct operation
and a long service life of the machine.
– We recommend an effective and periodical cleaning
of the machine and of the whole operating area, as
this represents an additional safety factor for the
operator.
– Do not use water, petrol or any solvents, as they
may damage the machine paint, the transparent
parts, etc. Use only neutral detergents.
– Remove all the dust from the equipment external
surfaces. Use an air jet for the inner parts.
Important
The solvents to use to clean any scraps of
adhesive can vary according to the type of
adhesive being used.
Contact the supplier of the labels to choose the
most suitable type of solvent. It is essential to
avoid using petrol-based solvents to clean plastic,
rubber or painted parts; do not use butanone or
any of the other solvents generally used for
cleaning away ink, in particular.
CLEANING THE PAPER BRAKING PAD
Proceed as follows.
1 -Loosen the
knob
and align the
bracket with the turned areas on
the columns.
MAINTENANCE INSTRUCTIONS
IDM-01_014_0.tif
knob
