PackLab MODULE 120, Руководство пользователя

Страница: 17 / 48

Section 5
LABELING UNIT
- 9 -
English
F
412
0501
00.fm
ID
M
version:
Module 40/60/90/120
Foreword
The machine can be adjusted in several different
configurations, including the following changes and/or
adjustments:
– height of label positioning on the bottle;
– height of reel carrier disks and winding device disk;
– rings of the deviation rollers;
– position of the brake;
– position of the Stop photocell;
– angle of incidence of the label detaching blade
(label detaching device);
– label ejection speed (see page 15).
Important
Refer to the sizing parameter tables for the
settings relating to the various adjustments to
make. No tools are needed to adjust the SIZE. The
parts on which action has to be taken (knobs,
handles, rings) to change the size are colored in
red.
LABELLING MACHINE HEIGHT ADJUSTMENT
The height of the whole module can be
adjusted according to the height of
labelling required on the bottle.
1 -Loosen the handle.
2 -Turn the hand wheel to raise or
lower the column .
3 -Tighten the handle .
Important
If the 5-axis column is installed, it
may be necessary to take action on
the rolling, pitching and depth
adjustments too, according to the
values given in the size tables.
REEL CARRIER DISKS ADJUSTMENT
The height of the reel carrier disk can
be adjusted.
1 -Loosen the locking screw .
2 -Rotate the disk so that it can be
raised or lowered according to
operational needs.
Adjust both reel carrier disks
accordingly.
Important
Make sure that the reel carrier disks
on the unwinding device and winder
are on the same level (30 or 38 mm
from the top surface of the 80x80
support tubing). Adjust the red paper-guiding rings
fitted on the diverter rollers to the same level too. The
upper and lower rings must just come into contact
with the paper. Faulty alignment gives rise to:
- an inaccurate vertical positioning of the label;
- damage to the edge of the label backing paper;
- an untidy rewinding of the paper on the winder’s
spool.
ADJUSTMENT INSTRUCTIONS
IDM-41200600400.tif
hand-wheel
support
handle
IDM-01_008_0.tif
locking screw
reel carrier disk