2. Gently place the base of either of the two side panels along the edge of the firebox floor and wall. Then
slowly tilt the top part of the panels up into the edge of the wall and ceiling. Be careful that the top corner
of the panel closest to the front of the fireplace makes as little contact with the opening edge of the
firebox and gasket (Figure 26) as possible as this may damage the panel.
3. The rear panel is stabilized once the side panels are in place. Stabilize the side panels by installing the
glass baffle and panel bracket (Figure 22) and its bolts.
4. Install the ceramic glass baffle as outlined in “Installing the ceramic baffle:” on page 18.
Figure 25: Rear panel in place.
Figure 26: Upper firebox corner and gasket.
Figure 27: Right side panel in place.
Figure 28: Left side panel in place.
17
100000300 051119-48
i40 TOFINO
