OXTS RT1003, Руководство пользователя

Страница: 39 / 110

RT1003 Manual
Revision:
190628
39
Use default settings: NAVconfig loads the default settings the RT1003 was delivered with.
Note: Choosing Use default settings overwrites any advance settings that may have been sent
with prior configurations. To maintain those advanced settings, the Read initial settings from
device option must be used.
Read settings from a folder: It is possible to store a configuration in a folder. The
configuration comprises several files, so it is tidier to keep it in a folder by itself. To read the
configuration from a folder, select this option and then specify a folder by clicking the
Browse… button.
Read settings from an RD file: The RT1003 writes the configuration it is using to the
internally stored RD file. This option extracts the configuration used and loads it into the
configuration wizard. Specify an RD file by clicking the Browse… button.
Read initial settings from device: If the RT1003 is connected to the computer via Ethernet
it is possible to read the initial settings directly from the RT1003. The settings loaded are the
settings that were last committed to the RT1003 using NAVconfig. Select this option and
enter the correct IP address of your RT1003, or select it from the drop-down list. The list will
show all systems that are connected to the network, so if more than one system is connected
ensure you select the correct system.
Note: The list will not function correctly if NAVdisplay or other software is using the UDP
port unless the OxTS UDP Server is running.
GNSS selection
This page does not apply to the RT1003 and will remain unavailable.