OXTS RT1003, Руководство пользователя

Страница: 31 / 110

RT1003 Manual
Revision:
190628
31
Once the computer is configured, the IP address of an RT1003 can be found by running
NAVdisplay software; this will display the IP address of any connected system.
Note that it is possible to change the IP address of RT1003 systems. If the IP address has been
changed, NAVdisplay should still be able to identify the address that the RT1003 is using as
long as the PC has a valid IP address in the same range and this is not the same as the
RT1003's.
While the sending of configuration files and downloading of data is handled automatically by
software like NAVconfig and RT Post-process, it is also possible to manually move files to
and from the product using Windows File Explorer or another FTP application. The user-
name and password required to manually connect to the RT1003 are:
Username: “user”
Password: “user”
Firewall warning
The first time some OxTS applications are run, a firewall warning message similar to that
shown in Figure 12 may be triggered. This is because the program is attempting to listen for,
and communicate with, OxTS products on the network. The firewall must be configured to
allow each program to talk on the network, or programs will not work as intended.
Sometimes a warning will not be triggered, but the firewall may still block certain functions.
If a program fails to display the IP address of a connected product, check the firewall settings
for that connection. Ensure both Private and Public networks are selected to ensure the
software can continue functioning when moving from one network type to another.