OxyFlo Pro User Manual
Revision 1.1 | May 2015
22
3.
M
ONITOR
S
ETUP AND
U
SE
3.1
Unpacking and Inspection
Immediately notify Oxford Optronix Ltd. or your local distributor if the outer
packaging or carton is wet or damaged in any way. Unpack the OxyFlo Pro
and its components, ensuring that all items listed on the enclosed packing
list / dispatch note are present. If anything is missing or damaged please
contact Oxford Optronix Ltd. or your local distributor.
NOTE
: We recommend that the original shipping carton and shock-
absorbing inserts be stored in a safe place rather than discarded, since
these will be required for any warranty returns and/or for shipping the
OxyFlo Pro safely at servicing intervals.
3.2
List of Standard Components
OxyFlo Pro Unit/Monitor
Universal voltage input AC adapter (including integral power On/Off
switch)
Country-specific IEC power cable
User Manual (this document)
3.3
Connecting and Powering Up the Monitor
1. Position the unit on a flat and stable surface close to the point of
measurement. Note that the standard probe cable length is 3 metres
(approx. 10 feet).
2. Ensure that the integral power On/Off switch on the universal voltage
AC adapter is set to the OFF (0) position.
3. Plug the male connector end of the NX-PSU universal AC adapter
into the mains power inlet labelled
DC POWER IN
at the rear of the
monitor.
4. Plug the IEC power cable into the NX-PSU AC adapter and then into
a wall mains supply.
WARNING
Use ONLY the NX-PSU universal AC adapter provided by
Oxford Optronix. Failure to do so may result in irreparable
damage to the OxyFlo Pro monitor and may cause harm to
the user.