Oxford Instruments Mercury iTC, Руководство пользователя

Страница: 42 / 146

Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 42
USER INTERFACE
Original Instructions
The page displays a PID table. If the table is empty, only the first cell is displayed (see
Figure 3-24 ). If the table contains data, one or more rows of values are displayed (see
Figure 3-25 ).
The table contains the following columns:

T1 (K)
Enter the lower temperature of the temperature range for this row in K.

T2 (K)
Enter the higher temperature of the temperature range for this row in K. T2 (K) must
be greater than T1 (K) .

P (K)
Enter the width of the proportional band in K.

I (mins)
Enter the I (Integral) parameter in minutes.

D (mins)
Enter the D (Differential) parameter in minutes.
The page contains the following buttons

-
Tap once to delete the currently selected row from the table. A confirmation message
is displayed before the row is deleted. Tap
OK to delete the row. Tap Cancel to exit
without deleting the row.

Control
Tap once to return to the Control page.

Save
Tap once to save the table (see Section 3.2.16 ).

Load
Tap once to load a table that has been previously saved (see Section 3.2.17 ).

+
Tap once to add another row to the table. The new row is appended after the last row.