Overland Storage SnapScale Скачать руководство пользователя страница 217

Страница: 217 / 290

10400455-002



217

SnapScale/RAINcloudOS 4.1 Administrator’s Guide

8 - Maintenance

•

SnapExtensions – SnapEDR

•

Shutdown/Restart SnapScale

•

TCP/IP

•

Utility IP Address

•

Storage Network Properties

•

Change Password

(for a user with Admin rights)

•

Under certain circumstances, the Online/Rolling Update feature is not available:

Update Notification Option

You can configure RAINcloudOS to display an alert when updates are available for the
cluster.

Reason

Solution

Peer sets are degraded or rebuilding.

Address degraded issue and allow peer sets
to rebuild before updating.

OS versions are not consistent across all
SnapScale nodes.

Update the RAINcloudOS on the nodes
individually (using the Offline Update
option) so they are all the same.

Peer sets contain disk size mismatches.

Replace the smaller drives in a peer set
with ones that match the size of the larger
drives in that peer set.

Not supported for this software update file. Contact Technical Support.

The previously run Online/Rolling Update
failed or was aborted.

Contact Technical Support.

Due to an unknown reason.

Contact Technical Support.

Содержание SnapScale



































































































































































































































































































Результаты поиска

Содержание SnapScale

Отзывы:

Похожие инструкции для SnapScale

Бренды по названию

Популярные бренды

Overland Storage SnapScale, Руководство администратора

Результаты поиска

Содержание SnapScale

Отзывы:

Похожие инструкции для SnapScale

Бренды по названию

Популярные бренды