Oval FLOWPET-EG LS4976-4 0A Series, Инструкция по эксплуатации

Страница: 15 / 72

S-178-10(E）
1
〈 Oil Service 〉
Model
Press. Loss, kPa
Kerosene 1.mPa・s Heavy Oil 1mPa・s
LS7 （ 800 L/h） 7（ 800 L/h）
LS07 1（100 L/h） 0（000 L/h）
LS7 1（000 L/h） （800 L/h）
LS7 1（ m /h） 0（. m /h）
LS7 （11 m /h） （ 1 m /h）
LS7 7（0 m /h） （ m /h）
(6) Align the flow direction with the arrow mark on the meter body.
(7) The pulse generator of this meter makes use of the changes in magnetic flux. To minimize influence of exter-
nal magnetic fields, select an installation location sufficiently away from powerful magnets and conductors
creating strong magnetic fields.
(8) If electric heating is desired, consult factory.
(9) When you conduct a gastight test on the existing piping assembly, careful valve operations sequence is
required to safeguard the rotors against damage due to violent rotor spinning by rushing air currents. Adhere
to the instructions on operation sequence described on page 32.
Strainer
〈
Water Service
〉
Model
Press.Loss
kPa
LS77 （ 100 L/h）
LS77 1（ 00 L/h）
LS77 10（ 700 L/h）
LS77 7（1000 L/h）
● Pressure Losses of Flowpet
● Strainer Pressure Losses
Model
Press. Loss, kPa
Kerosene 1.mPa・s Heavy Oil 1mPa・s
SS78A （ 00 L/h） 0（800 L/h）
SS78A 7（ m /h） 8（. m /h）
SS78A （11 m /h） （ 1 m /h）
SS78A （0 m /h） 0（ m /h）
CAUTION: This model is not provided with subtract counter function. In applications where ripples
(to-and-fro motion of the fluid under ripple pressure) or reverse flows exist in the pipeline, the total
counter reading may not be consistent because it adds up flows irrespective of the flow direction.