Output Technology LaserMatrix Floor Model Stacker, Руководство оператора

Страница: 28 / 32

26 LaserMatrix Floor Model Stacker
Lubrication
The LaserMatrix Floor Model Stacker is lubricated for
life. Do not lubricate in any way.
TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING
When It Doesn’t Run —
Check the power supply and control cable.
When Only One Pair of Coils Turns —
One of the two motors has failed. Call one of the voice or
fax phone numbers listed on the back of the title page.
When It Doesn’t Stack Right —
•
Check that the paper falls in a straight line from the printer
to the stacker. Make sure the paper stack support is
directly below and centered with the paper chute.
•
In general, the stack should be centered front-to-rear and
side-to-side among the four coils.
•
Check that the paper is not being refolded in the wrong
way. It should stack on the stacker like it was in the box.
•
Use a better grade of paper. See Pages 27 and 28 for
ordering paper from Output Technology.