Output Technology LaserMatrix Floor Model Stacker, Руководство оператора

Страница: 25 / 32

LaserMatrix Floor Model Stacker 23
9. Adjust paper stacker, if necessary, so that paper falls in a
straight cascade from the paper chute to bottom of stacker.
The paper should be centered between the two pairs of
coils. Stacking works best if the paper stack is started
about
1
/
8
in. (approximately 3 mm) from the paper
guide(s), as shown in the following illustration.
LB0-T
10. Begin printing.
11. If necessary, re-adjust paper stacker and/or refolding unit.
The paper should not drag or hang up on sheet-metal paper
guide(s), especially when you just begin a stack.