Output Technology LaserMatrix Floor Model Stacker, Руководство оператора

Страница: 17 / 32

LaserMatrix Floor Model Stacker 15
c. Tighten screws on both connectors to secure cable.
d. Make sure manual mode switch on refolding deck is
off, as shown in the illustration on Page 13.
11. Insert connector on power supply cable into receptacle on
refolding deck. Connect power supply to a suitable
receptacle.
If your power source is other than 120 vac at 60Hz or 230
vac at 50Hz (or your receptacle is other than a NEMA 5-
15 or a CEE 7/7, as shown in the following illustration),
you will need to purchase a class 2, regulated 12
vdc, power supply. The
power supply must be
capable of supplying 12
vdc at a minimum of 800
ma to the stacker via the
type of connector shown
in the following
illustration.
LB0-
J1
12. If desired, use supplied cable ties to fasten control and
power cables to legs of stacker.