Output Technology LaserMatrix Floor Model Stacker, Руководство оператора

Страница: 18 / 32

16 LaserMatrix Floor Model Stacker
13. Test manual mode by toggling the manual mode switch on
the refolding deck.
Both pairs of refolding coils should turn.
14. Test automatic mode for a LaserMatrix printer, as follows:
a. Turn on LaserMatrix printer.
b. Print a one-page print job.
1
When the LaserMatrix printer begins to print it will
start the stacker. The stacker will stop when the
LaserMatrix printer stops printing. If it doesn’t start
and stop automatically, you may need to install a
paper motion sensor for automatic operation. See
Parts & Accessories, Page 27.
15. Slip the main paper guide onto the paper stack support, as
shown in the following illustration.
16. Slide this assembly, the paper stacker, between support
channels on refolding deck.
NOTE: The paper stacker assembly may be installed for either
right- or left-side access, whatever’s convenient.
1
For example, to print a summary page, be sure the printer is off line, then press the
MENU
key. After the printer displays “Print: Summary,” press
STORE
to print.