Otto Bock 490E75 1 C Series, Инструкция по эксплуатации

Страница: 116 / 128

Flashing LED Error/warning Cause Possible measure
Attendant control fault Defective attendant control Switch off attendant control and turn
control panel off/on
Joystick error Attendant control joystick
not in home position when
the unit is turned on Switch off attendant control and move
joystick to home position before
switching the unit on
Switch control panel off/on
Communication error
between the attendant con­
trol (joystick) and the con­
trol panel/controller
Defective cable, loose plug
connection Check cabling / plug connections
8.4 Behaviour in case of breakdowns
INFORMATION
Note that the following instructions also apply for flat tyres. Independent tyre repairs by the user or an attendant
are not intended.
In case of breakdowns, promptly inform the qualified personnel who adjusted the product or the manufacturer’s
service (see inside or outside of back cover for addresses). All relevant details have to be provided, such as the
type of power wheelchair, type of breakdown (e.g. problems with the motor) and if possible, the serial number of
the power wheelchair.
To get help faster, noting the address and telephone number of the qualified personnel in the field provided on the
back of these instructions for use is recommended. This information should be kept on hand, especially when driv­
ing outdoors.
9 Disposal
9.1 Safety instructions
NOTICE
Disposal of batteries
Pollution due to incorrect disposal
► Observe the information printed on the batteries by the manufacturer.
►
Note that the batteries may not be disposed of as household waste.
9.2 Disposal information
Return the product to the qualified personnel for disposal.
Defective batteries are taken back by the qualified personnel in exchange when new batteries are purchased.
All components of the product must be disposed of properly in accordance with the respective national environ­
mental regulations.
10 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.
10.2 Warranty
Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit­
ted this product or the manufacturer's service (see inside back cover for addresses).
10.3 Privacy notice
Some components of the product contain data storage modules that temporarily or permanently store data. These
data are exclusively of a technical nature and serve the safety of the user, the identification and elimination of errors
and/or optimising the functionality of the product.
116
Disposal
490E75=1_C