Otto Bock 490E75 1 C Series, Инструкция по эксплуатации

Страница: 82 / 128

WARNING
Lack of maintenance
Severe user injuries, damage to the product due to maintenance errors
► Check the adjustment functions for visible signs of damage at least
1 x per month
and ensure all screw con­
nections are tight.
WARNING
Exposed pinch points
Pinching, crushing of limbs (e.g. fingers) due to lack of caution in danger areas, damage to the product
► Note that when seat functions are used, inherent pinch and shear points are located between the seat frame
and the power wheelchair frame.
►
Ensure that no body parts, such as hands or feet, are in the danger area while the seat functions are used.
► Ensure that no interfering objects, such as clothing or other obstacles, are in the danger area while the seat
functions are used.
7.12.2 Manually elevating legrests
WARNING
Incorrect use of the power leg supports
Falling, tipping over due to driving with unallowable seat settings
► Drive in street traffic only with the leg supports lowered.
INFORMATION
► Please also observe the overriding safety instructions in the section "Manual seat functions" > "Safety instruc­
tions": see page 81.
The mechanically elevating legrests with a gas compression spring let the user change the angle independently to
prevent a constant pressure load or to provide anti-shock support.
68
Pivoting the leg support
1) Activate the release lever on the leg support (see
arrow).
2) Move the leg support to the desired position.
3) Let go of the release lever.
→ The leg support is adjusted.
69
Removing the leg support
1) Grasp the top of the leg support (see fig. 69,
item 1).
2) Pull the leg support straight up and out of the hold­
er.
Attaching the leg support
1) Grasp the top of the leg support (see fig. 69,
item 1).
2) Push the leg support straight down into the holder.
The foot supports can also be folded up to increase the
entry and exit area.
82
Use
490E75=1_C