Otto Bock 490E75 1 C Series, Инструкция по эксплуатации

Страница: 114 / 128

Error message Error no. Contents Cause Possible action
Memory Error (None) Unspecified memory
error in control mod­
ules e.g. defective plug
connection, cable
break
Defective
control
module
Contact qualified
personnel
PM Memory Error (None) Memory error in con­
troller e.g. defective plug
connection, cable
break
Defective controller
Check all plug con­
nections and cables
on controller
If error persists, con­
tact qualified person­
nel
Bad Cable (None) Error on the commu­
nication
cables
between control
modules
e.g. defective plug
connection, cable
break
Check all plug con­
nections and cables
on the control mod­
ules (incl. controller)
If error persists, con­
tact qualified person­
nel
Module Error (None) Error in control mod­
ules e.g. unspecified error
in displayed control
module
Displayed
control
module defective
Check all plug con­
nections and cables
If error persists, con­
tact qualified person­
nel
System Error (None) System error Non-attributable error
in control modules
(primarily from third-
party providers) Check all plug con­
nections and cables;
disconnect/test
any
modules from third-
party providers in
succession if applic­
able
If error persists, con­
tact qualified person­
nel
SID Detached (None) Special control dis­
connected Special control dis­
connected from the
connection module of
the TEN° LCD mod­
ule (sip and puff con­
trol)
Defective
special
control connection on
the connection mod­
ule of the TEN° LCD
module
Check all plug con­
nections and cables
between special con­
trol connection and
sip and puff control;
check programming
parameters
If error persists, con­
tact qualified person­
nel
1E07 External on/off switch
disconnected
from
control panel
Switch Detached
1E08 External profile/mode
switch disconnected
from control panel
e.g. defective cable
connection to control
panel
Defective switch or
control panel Check cable connec­
tion and switching
function of the extern­
al switch
If error persists, con­
tact qualified person­
nel
Gone to Sleep (None) Control device
switches to sleep
mode
Extended inactivity
while control device
is switched on
Switch control device
off/on
Charging (None) Battery charger is
connected Battery charger is
connected to char­
ging receptacle Disconnect battery
charger prior to driv­
ing
114
Maintenance and repair
490E75=1_C