Otto Bock 490E75 1 C Series Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 128

background image

32

•

To call up the "Settings" menu, the [Slow Speed]
and [Fast Speed] buttons have to be pressed at the
same time for 1 second.

•

To navigate through the menu, move the joystick up
and down.

•

The desired setting function (e.g. [Set Time]) is
selected by moving the joystick to the right.

•

Specific settings (value changes) are made by fur
ther joystick movements up/down or right/left.

•

To save, select the menu item [Exit] and move the
joystick to the right to confirm.

Menu item [Set Time]

Moving the joystick to the right calls up the screen for the clock settings. Here the time that is displayed can be
changed with additional joystick movements.

Menu item [Display Time]

By moving the joystick to the left/right, the time display format can be changed or the display turned off. The avail
able options are [12hr], [24hr] or [Off].

Menu item [Distance]

Moving the joystick to the right calls up the screen for the odometer settings. The following options are available:
•

[Total Distance]: Display of the overall distance travelled with the control device.

•

[Trip Distance]: Display of the distance travelled since the last reset to zero.

•

[Display Distance]: Moving the joystick to the left/right determines whether the total distance or trip distance
appears on the display.

•

[Clear Trip Distance]: The trip distance can be erased by moving the joystick to the right.

•

[Exit]: Save and return to the "Settings" menu by moving the joystick to the right.

Menu item [Backlight]

By moving the joystick to the left/right, the intensity of the LCD backlight can be adjusted. The adjustment range is
0% to 100% in steps of 10%.

Menu item [Background]

The available options can be selected by moving the joystick to the left/right:
•

[Blue]: The screen background is blue for all profiles.

•

[White]: The screen background is white for all profiles.

•

[Auto]: The screen background can be preprogrammed by qualified personnel.

Menu item [Exit]

Save the settings and exit the "Settings" menu by moving the joystick to the right. The display switches to the first
driving profile (e.g. "1 Drive").

7.6.3 R-Net control device with JSM-LED-L control panel

CAUTION

Risk of uncontrolled driving behaviour

Falling, tipping, collision with persons or nearby objects due to interference from electromagnetic fields

►

Switch all mobile devices off while driving.

►

Turn the control unit off when it is not needed.

The power wheelchair is controlled by an R-Net control device in combination with the JSM-LED-L control panel.
Because the control unit is programmable, it can be adapted to the personal requirements of the user; e.g. the
speed, acceleration and deceleration values can all be adapted.

7.6.3.1 Control panel

The power wheelchair is operated using the control panel.

34

Use

490E75=1_C

«
...
32
33
34
35
36
...
»

Содержание 490E75 1 C Series

































































































































Отзывы:

Нет отзывов

Похожие инструкции для 490E75 1 C Series

ARDEA Mobility VIRGO HS-2850

Бренд: Moretti Страницы: 82

Бренд: Sunrise Medical Страницы: 18

Бренд: Glide Страницы: 31

Бренд: National ramp Страницы: 138

Бренд: Enigma Страницы: 23

BIOS living 56084

Бренд: Thermor Страницы: 5

Бренд: HOMCOM Страницы: 9

Бренд: Zip'r Страницы: 29

Бренд: Thomashilfen Страницы: 44

Бренд: Rehab Страницы: 2

SOMA ECON 800 SERIES

Бренд: Karma Страницы: 36

Бренд: aidapt Страницы: 3

Бренд: R Healthcare Страницы: 41

Бренд: lifestyle mobility aids Страницы: 2

Бренд: Barrett Страницы: 50

Бренд: Rebotec Страницы: 12

Бренд: Rebotec Страницы: 12

Бренд: Rebotec Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды