Otto Bock 3B5-X2, Инструкция по эксплуатации

Страница: 103 / 108

103
LED on
power
supply Status
LED on
battery
charger Event
Battery charger connected to receiver, good connection.
This display turns off automatically after approximately one minute to
avoid bothersome light at night. The charging process is not affected.
Battery charger disconnected
Beep
signal Vibration
signal Event Resolution
1x short 1x short Self-test completed successfully.
Product is operational.
3x short 3x short Maintenance note:
e.g. service interval has been
exceeded, temporary disruption of a
sensor signal • Use the Cockpit app to check
the next maintenance date for
the prosthesis (see Page 87).
Should the date lie within the
next month, arrange a mainten­
ance appointment with the
O&P professional. For this
appointment, the O&P profes­
sional has to be provided with
the battery charger and power
supply in addition to the pros­
thesis with tube adapter.
• Conduct the self-test again by
connecting/disconnecting the
battery charger.
• If the beep signal sounds again
and the maintenance date has
not yet been reached or
exceeded, visit the O&P pro­
fessional soon. If necessary,
the prosthetist will forward the
prosthesis to an authorised
Ottobock Service Center.
• The product can be used
without restrictions. However,
vibration signals may not be
generated.
Battery charge level
During the charging process, the current battery charge level is indicated by the LEDs lit on the
side of the charger.
LEDs 0 1 2 3 4 5
Battery
charge level 0%-10% 10%-30% 30%-50% 50%-70% 70%-90% >90%