Otto Bock 3B5-X2, Инструкция по эксплуатации

Страница: 100 / 108

100
Beep signal Vibration signal Event Required action
– 3 x long Charge level under
25% Charge battery soon.
Remaining operating time
approx. 24 hours
– 5 x long Charge level under
10% Charge battery soon
Remaining operating time
approx. 6 hours
5 x long 5 x long repeated
every 60 seconds
Medium error (see
Page 92)
e.g. a sensor is not
operational
Walking possible with
restrictions. Please note
the change in flexion res­
istance.
The product must be
inspected immediately by
an O&P professional.
10 x long 10 x long Battery charge level
5%
After the beep and
vibration signals, the
product switches to
empty battery mode
and then switches
off. Charge the battery.
30 x long 1 x long, 1 x short
repeated every
3 seconds
Severe error/indic­
ation of safety
mode activation
(see Page 92)
e.g. one or more
sensors are not oper­
ational
Attempt to reset this error
by connecting/discon­
necting the battery char­
ger.
If the error persists, use
of the product is prohib­
ited. The product must be
inspected immediately by
an O&P professional.
– Continuous Total failure
Electronic control no
longer possible.
Safety mode active or
undetermined valve
state. Undetermined
product behaviour.
Attempt to reset this error
by connecting/discon­
necting the battery char­
ger.
If the error persists, use
of the product is prohib­
ited. The product must be
inspected immediately by
an O&P professional.
Error while charging the product
LED on
power
supply Status
LED on
battery
charger Error Resolution
Country-specific plug adapter not
fully engaged on power supply Check whether the country-specif­
ic plug adapter is fully engaged on
the power supply.