VS 2001
Technical Handbook
Installation
Page 58
Marconi Proprietary information
P/N: 779-0373/02
Revision 02
Fig. 3.5:
Control panel (rear side)
3.4.1.1
Installation in the car radio cavity
Follow the instructions given below.
1.
Drill four holes in the dashboard corresponding to “A”. The holes should have
a diameter of 9 mm.
2.
Insert the bracket into the car cavity.
3.
Bend the tabs to suit.
4.
(Optional according to the type of vehicle). Insert the appropriate screws in
holes “B” (Ø = 3.5mm). Screws are supplied with a kit that contains 5 screws
of 25mm in length and 5 screws of 50 mm in length).
5.
Insert the Control Panel into the bracket and fix the captive screws.
Fig. 3.6:
Bracket for control panel (installation in the car radio cavity)
52
