Ones Stop Systems
EB7-X8G2-RAS | 4
Install PCIe Cards
30
CAUTION
Aside from reading an IP address, the IPsetup.exe utility can be used to set an IP address other
than the one assigned initially by the DHCP server—using the Set button. It is recommended,
however, not to use the utility for this purpose since we will lose connectivity with the chassis until
the machine running IPsetup.exe obtains an IP address in the same IP subnet. The next section will
show a preferred way of accomplishing this via the browser interface. In case you need to back-
trace any of these steps, you can always
reset the chassis back to its factory settings
.
4.4.3 Configure Network Settings
Open your browser and enter the IP address in the URL window and press
Enter
. The following browser window will open up:
The initial, Generic Info page provides status information and no username or password is required. If the main power switch is off, then this
page will show the IP Address that is currently assigned to the chassis, the IP Address that will receive trap information, the temperature
settings and that the chassis is powered off. To make changes to your settings you will need to follow the “IP Configuration” link. The IP
configuration page is password protected and before access is given the following dialog will appear:
The factory settings define
User name
to be “
default
” and the
password
to be “
OSS
”. Enter these values in the appropriate field and click OK. If
the username and password have not been changed from the factory settings, the IP Configuration page will appear as shown below. If it
doesn’t, see your network administrator for the correct user name and password.
