Operator Manual
Cha
pt
er
:
Sa
fe
ty
in
fo
rm
at
io
n
6
The welding processes produce fumes and gases. Inhaling them can be hazardous to health.
Keep the head away from the fumes. Do not inhale the fumes. Do not cover the vents on the equipment. Carefully read the
instructions supplied concerning the various types of metals, detergents and protection gases. The equipment should ideally be
installed in a large, specially dedicated room. If the room is small, ensure that it is sufficiently ventilated. The protection gases used
for melting can gradually saturate the air causing discomfort or death. Do not weld in the proximity of areas used for degreasing,
cleaning or spraying. The heat could react with the vapours, producing toxic and irritant gases. Make sure that the metals do not
have impurities such to cause fumes or gases during melting. Envision the use of an auxiliary extractor system or, alternatively, the
use of a face mask.
LASER welding can cause fire or explosion.
The sparks produced during welding can escape and cause fire or burns. It is prohibited to introduce inflammable gases and liquids
into the welding chamber. Cylinders and objects containing highly flammable gases or liquids should be moved a safe distance away
from the welding chamber.
Fire warning, keep an extinguisher in the immediate vicinity
.
Do not use water to clean the equipment.
Avoid using water near the running equipment. Do not place liquid containers over the equipment. Do not place the equipment in
very humid environments (permissible relative humidity from 30% to 80%) or near heat sources or that produce moisture.
Protective clothing should be worn.
Wear protective clothing such as gloves, long-sleeved jackets, leather aprons, etc. Melted metal sparks can cause burns on the skin.
Do not cover the LASER with blankets or fabrics.
Do not cover running equipment with blankets or fabrics, which may overheat and burn.
Perform periodic maintenance.
Consult the relevant chapter and perform the maintenance recommended. If there is a problem, do not use the equipment; Consult
the manual and contact technical support.
The manufacturer cannot be held liable for direct or indirect damage to persons, property or pets, due to failure to comply with the
safety regulations and the information contained in this documentation.
