Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 190 / 392

To edit multiple cells at once, select the cells by holding down the Shift or Ctrl key while
clicking, and then click the
Edit button.
4.9.16 Transmitting RTCM Messages With StudioView
The RTCM Transmission
1
function allows to re-transmit RTCM message from the GSG
unit to the external receiver. In order to use this function, a virtual Base Station has to be
configured (see also: "Base station" on page 67 ) and used in your scenario, and the
external receiver has to be connected to the serial port.
1.
To open the RTCM Transmission window in StudioView, navigate to Tools > RTCM
Transmission or click .
2.
Click to open the Connections Manager tool (for details, see "Connecting Stu-
dioView to GSG" on page 122 .)
3.
Click to configure the serial port, or use the dropdown menu.
4. If required, specify the Delay in seconds.
5.
To start transmitting RTCM messages to the selected unit, click .
The button will appear, with a counter of all the RTCM messages
transmitted.
6.
To stop the transmission, click .
See also these SCPI commands: "SOURce:SCENario:RTCM?" on page 298 ,
"SOURce:SCENario:RTCMCFG?" on page 299 and "SOURce:SCENario:RTCMCFG" on
page 299 .
1
Radio Technical Commission for Maritime Services
174 User Manual GSG-5/6 Series Rev. 27
4.9 Studioview Tasks