Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 255 / 392

SOURce:REFPOWer?
READ:
-121.3
6.3.3.5 SOURce:ABSPOWer
Function
Changes the absolute power for the given signal type and orbit type.
Command Syntax
SOURce:ABSPOWer <signal name>,[<orbit type name>,]<power>
Notes
This command can only be used before starting a simulation. The setting is not stored dur-
ing scenario or 1-channel mode execution.
If power is inside allowed limits, but other RF parameters need to be modified, such para-
meters are modified and an error about a settings conflict is set.
You can use the keyword “all” instead of
<signal name>
. However, in this case the
<orbit type name>
cannot be specified. The power you entered will be used for all sig-
nal types for all constellations.
You can use the keyword “default” instead of
<power>
. The chosen
<signal name>
(and
optionally
<orbit type name>
) will use the default power (specified in the cor-
responding ICD).
Examples
SEND:
SOUR:ABSPOWer BDSB1,GEO,-123.2
Both keywords “all”, and “default” can be used together:
SOURce:ABSPOWer all,default
This command will reset whole power configuration to the default state (reference
power and relative power offsets as it is specified in ICDs)
6.3 Command Reference
User Manual GSG-5/6 Series Rev. 27 239