Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 308 / 392

SOURce:SCENario:IONOmodel?
READ:
ON
SEND:
SOURce:SCENario:IONOmodel?
READ:
codg0010.14i,codg0030.14i,codg0020.14i
6.3.3.72 SOURce:SCENario:POSition
Function
Set latitude, longitude and altitude for the geodetic position (WGS84) as the start position
for the loaded scenario, or the current position if the scenario is running.
Latitude and longitude are defined using decimal degrees. The altitude is given in meters
as altitude over an ellipsoid.
For latitude and longitude, the recommended decimal accuracy is 8 digits, with 6 digits
being the minimum recommended accuracy. No benefit is achieved at accuracies greater
than 10 digits for latitude or longitude.
The altitude can be specified to a resolution down to two digits or centimeter level. No
benefit is achieved with altitude accuracies greater than 4 decimal digits.
Note: In order to use this command in real time, OPT-RSG is required.
Command Syntax
SOURce:SCENario:POSition TIME,<decimal>,<decimal>,<decimal>
Parameter
TIME must be IMMediate.
Decimal Latitude [-89.99999999, +89.99999999] degrees North
Decimal Longitude [-360.00000000, +360.00000000] degrees East
Decimal Altitude [-1000.00, +20,200,000.00] meters
292 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference