Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 83 / 392

Figure 3-14:
Configured sweeper signal
3.5.9.3 Base station
This feature allows you to configure a Base station , as it is typically used for high-precision
positioning, e.g. in surveying applications: A receiver in a fixed and known position tracks
the same satellites the mobile receiver ("rover") does, and in real-time transmits corrective
positioning data to the receiver in the rover via a radio transmission stream.
The Base station feature can only be enabled with GSG 6-Series units that have the
Real- Time Kinematics Option installed (OPT- RTK, see "List of Available Options" on
page 205 .)
To configure a "virtual" Base station, which supports the output of RTCM differential data
to be used as input by a rover receiver, navigate to
Select > Select Scenario > Configure
Scenario, View 2/3: Advanced: Base Station .
Figure 3-15:
Base station configured in Advanced submenu
Once you selected the On option for Base station , the configuration view will be dis-
played: Configure the position of the base station and the RTCM messages to be output by
it.
3.5 "Select" Menu
User Manual GSG-5/6 Series Rev. 27 67