Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 218 / 392

Scenario File Key-
word
Parameter Value Comment
IRNSSL5 [0, 1] , where 0 cor-
responds to 'Off' , and 1
to 'On' Specifies the type of signal interference
mode [0. 1, 2, 3] , where 0 is
modulated,1 is unmod-
ulated, 2 is sweep and 3
is noise Specifies the type of signal interference
SatId GPS: [1,32]
GPS carrier: 0
Glonass: [1, 24]
Glonass carrier: [-7,6]
Galileo: [1, 36]
SBAS: [120, 158]
BeiDou: [1,37]
QZSS: [1,4]
IRNSS: [1:7] Specifies the satellite ID (PRN / frequency slot) for
interference signal
Default: 3
For 'Glonass carrier', the term 'SatId' refers to the
frequency slot.
Power [-65, -160] Signal strength in dBm. Default: unit's transmit
power
FreqOffset [-999999, 999999] Frequency offset in Hz. Default: 0
JammerPosition latitude: [-89.999999,
89.999999]
longitude: [0,360]
altitude: [0.0, 18,240.0]
or 'Not set' Position of the jammer. See StartPosition above.
StartOffset [-
40.000000,40.000000] Start offset for sweeper or noise in MHz
EndOffset [-
40.000000,40.000000] End offset for sweeper or noise in MHz
SweepTime [4,20] Sweep time in microseconds
RtcmConfig 3x, corresponding to
RTCM 3.2
[1002 | 1004 | 1006 |
1010 | 1012 | 1033], any
combination of one or
more of these Comma separated fields.
First, field is RTCM version.
Next, is a list of 1 or more message types, involving
any combination of the supported types.
Environment Filename or 'None' Selected file with Environment model. Default:
'None'
Vehicle Filename or 'None' Selected file with Vehicle model. Default: 'None'
LeverArm [-500.0,+500.0]
[-500.0,+500.0]
[-500.0,+500.0] The XYZ offset for the antenna position versus the
body mass center. Default: 0 0 0
202 User Manual GSG-5/6 Series Rev. 27
5.13 Scenario File Format