Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 339 / 392

6.3.6 STATus: Subsystem Commands
6.3.6.1 STATus:OPERation:CONDition?
Function
Reads out the contents of the operation status condition register. This register reflects the
state of the GSG operation.
Command Syntax
STATus:OPERation:CONDition?
Returned Format
<Decimal data> = the sum (between 0 and 97) of all bits that are true. See table below:
Bit Weight Condition
6 64 Waiting for bus arming
5 32 Waiting for triggering and/or external arming
0 1 Calibrating
6.3.6.2 STATus:OPERation:ENABle
Function
Enables operation status reporting by setting the enable bits of the Operation Status
Enable register.
This register contains a mask value for the bits to be enabled in the Operation Status Event
register. A bit that is set True in the enable register enables the corresponding bit in the
status register.
An enabled bit will set bit #7, OPR (Operation Status Bit), in the Status Byte Register if the
enabled event occurs.
Command Syntax
STATus:OPERation:ENABle <Decimal data>
Parameters
<decimal data> = the sum (between 0 and 96) of all bits that are true. See table below:
6.3 Command Reference
User Manual GSG-5/6 Series Rev. 27 323