Orolia GSG-5 Series, Руководство пользователя с руководством по SCPI, Страница: 138 / 392

4.9.2 Installing StudioView
A free 30-day demo version of StudioView can be downloaded from the Orolia website,
see the link below.
After the 30-day trial period you need to purchase a StudioView license to activate all fea-
tures, with the exception of the
Uploader , which does not require a license. The Uploader
is used to perform firmware updates or upload scenario files to a GSG unit.
To install StudioView:
1.
Download the software:
https://files.spectracom.com/public-downloads/gsg-
56-update-files-and-documentation
2.
Locate the downloaded
.exe
file, and launch it. Follow the on-screen installation
instructions.
3.
Towards the end of the installation process, among other things you will be asked if
you want to install the
National Instruments VISA driver : This driver is required for
Studioview to communicate with your GSG unit, so please check the box (unless you
do not plan to connect your PC to a GSG unit).
4.
Save the VISA runtime
.exe
file, and launch it to install the driver.
The topic "Connecting StudioView to GSG" below describes how to establish com-
munication between StudioView and a GSG unit (or any other device on the network).
4.9.3 Connecting StudioView to GSG
StudioView needs to be connected to your GSG unit so that you can up-/download files,
record data, or use the GSG web interface.
On the GSG side, you can use the Ethernet port, USB port, or GPIB interface to establish
the hardware connection. On the StudioView side, the Connections Manager tool is
used to detect and configure the connection.
Once you have connected a cable to your GSG unit, follow the procedure below to estab-
lish communication between StudioView and the GSG unit (Ethernet is used as an
example).
122 User Manual GSG-5/6 Series Rev. 27
4.9 Studioview Tasks