MW1008P, user manual
7
GENERALITIES
This chapter gives an overview of the MW1008P characteristics. For further information
please refer to the operation section.
DISPLAY
The two lines of the LCD show
measured
values,
selected
parameters, instrument status
and various messages. When
making normal measurements,
the major parameter (
L, C, R,
|Z|, G
) is shown on the top line
and the appropriate minor
parameter (
Q, D, X,
, B
), is
shown on the bottom line. The
number of displayed digits and
the location of the decimal
point are automatically adjusted
according to the range and resolution. The
symbol in front of the major parameter indicates
that the measurement is displayed as a relative or absolute deviation from a nominal value. A
dark arrow present in the top left of the display indicates the unit is in the Auto Parameter
mode.
If a dark arrow is displayed in the bottom left of the LCD, the unit is in the Auto
Model mode.
The Range is indicated at the top right of the display. The ‘A’ character behind
the Range number indicates that the instrument is in auto range mode. In Manual or Hold
ranging mode, this letter becomes a blinking “H” character. The selected test frequency is
displayed on the bottom right of the display. The word « USER » is displayed when the user
frequency is selected.
