MW1008P, user manual
21
SORTING COMPONENTS
The MW1008P allows comparison of components parameters to a pre-defined value. The
instrument will calculate the difference to the pre-programmed value, which could be
displayed in absolute difference or percentage formats.
To access sorting function, press key Menu. For the other
options of menu , please refer to description of the
Menu
key,
described in page 9.
Press the key below right arrow (n/Vs/M) until the option
Sorting
appears. Validate this function by pressing key below
[ON].
To define the tolerance percentage, press the key below option
Next
until the desired tolerance is displayed. Possible values
are 1%, 2%, 5%, 10%, and 20%.
Press the key below right arrow
Enter nominal value of the component. For this, press the key
below EDIT.
A cursor appears below the figure to be modified. To change
the figure press the key below option CHANGE. The figure
will increment by one unit at each press. To go to next figure
press key NEXT. The cursor will move below the next figure.
Modify this way the value until getting the desired value. The
unit at the end of the number can also be modified. The
available options are p (pico, 10
-12
), n (nano,10
-9
), µ (micro,10
-12
), m (milli,10
-3
), white (as
displayed), k (kilo,10
3
), and M (Mega,10
6
). When the value is entered, press the key below
option OK.
The entered value appears now on the first line.
Press the key below right arrow.
Configure the alert notification when the measured component
satisfy the sorting conditions. The default notification is a
short beep. To change this option, press the key below option
Next. The possible options are SHORT (short beep), LONG
(long beep), NONE (no beep). Press the key below right arrow.
The “backlight” option allows to configure the display lighting
as a visual indicator when the component is within specified
tolerance. Do not confuse with backlighting configuration that
is in main configuration menu. Please note that the back-lighting must be activated for this
function.
