MW1008P, user manual
28
PINOUT OF THE TEST CONNECTOR
The pinout of the DIN type DUT connector is given below (side view). This allows to make
your own test cables. For a classical use, you just need to use a standard 5 pins male DIN
plug.
The cables should be shielded type, the shields being connected to ground (pin 3)
1 :
HS (High Sense)
2 :
HD (High Drive)
3 :
0V (GND)
4 :
LD (Low Drive)
5 :
LS (Low Sense)
5
4
3
2
1
