ORiNG IGS-9168GP series, Руководство пользователя

Страница: 139 / 166

IGS-9168GP User’s Manual
ORing Industrial Networking Corp 138
Clear Flushes all system log entries
|<< Updates system log entries, starting from the first available entry ID
<< Updates system log entries, ending at the last entry currently displayed
>> Updates system log entries, starting from the last entry currently displayed.
>>| Updates system log entries, ending at the last available entry ID.
5.10.5 Cable Diagnostics
You can perform cable diagnostics for all ports or selected ports to diagnose any cable faults
(short, open etc.) and feedback a distance to the fault. Simply select the port from the
drop-down list and click Start to run the diagnostics. This will take approximately 5 seconds. If
all ports are selected, this can take approximately 15 seconds. When completed, the page
refreshes automatically, and you can view the cable diagnostics results in the cable status
table. Note that VeriPHY diagnostics is only accurate for cables 7 - 140 meters long. 10 and
100 Mbps ports will be disconnected while running VeriPHY diagnostics. Therefore, running
VeriPHY on a 10 or 100 Mbps management port will cause the switch to stop responding until
VeriPHY is completed
.
Label Description
Port The port where you are requesting VeriPHY Cable Diagnostics
Cable Status Port: port number
Pair: the status of the cable pair
Length: the length (in meters) of the cable pair
5.10.6 SFP Monitor
SFP modules with DDM (Digital Diagnostic Monitoring) function can measure the temperature