ORiNG IGS-9168GP series, Руководство пользователя

Страница: 104 / 166

IGS-9168GP User’s Manual
ORing Industrial Networking Corp 103
Policy n : the ACE applies to this policy number, where n can range from 1
to 8.
Frame Type
Indicates the frame type of the ACE. These frame types are mutually
exclusive.
Any : any frame can match the ACE.
Ethernet Type : only Ethernet type frames can match the ACE. The IEEE
802.3 descripts the value of length/types should be greater than or equal
to 1536 decimal (equal to 0600 hexadecimal).
ARP : only ARP frames can match the ACE. Notice the ARP frames will
not match the ACE with Ethernet type.
IPv4 : only IPv4 frames can match the ACE. Notice the IPv4 frames will
not match the ACE with Ethernet type.
Action
Specifies the action to take when a frame matches the ACE.
Permit: takes action when the frame matches the ACE.
Deny: drops the frame matching the ACE.
Rate Limiter
Specifies the rate limiter in number of base units. The allowed range is 1
to 15. Disabled means the rate limiter operation is disabled.
Port Copy
Frames matching the ACE are copied to the port number specified here.
The allowed range is the same as the switch port number range. Disabled
means the port copy operation is disabled.
Logging
Specifies the logging operation of the ACE. The allowed values are:
Enabled : frames matching the ACE are stored in the system log.
Disabled : frames matching the ACE are not logged.
Please note that system log memory capacity and logging rate is limited.
Shutdown
Specifies the shutdown operation of the ACE. The allowed values are:
Enabled : if a frame matches the ACE, the ingress port will be disabled.
Disabled : port shutdown is disabled for the ACE.
Counter Indicates the number of times the ACE matched by a frame.