ORiNG IGS-9168GP series, Руководство пользователя

Страница: 13 / 166

IGS-9168GP User’s Manual
ORing Industrial Networking Corp 12
3.2 Wall Mounting
Besides Din-Rail, the switch can be fixed to the wall via a wall mount panel, which can be
found in the package.
Wall-Mount Kit Measurement
To mount the switch onto the wall, follow the steps:
1. Screw the two pieces of wall-mount kits onto both ends of the rear panel of the switch. A
total of six screws are required, as shown below.
2. Use the switch, with wall mount plates attached, as a guide to mark the correct locations of
the four screws.
3. Insert four screw heads through the large parts of the keyhole-shaped apertures, and then