ORiNG IGS-9168GP series, Руководство пользователя

Страница: 81 / 166

IGS-9168GP User’s Manual
ORing Industrial Networking Corp 80
Remap DP Aware : DSCP from the analyzer is remapped and the
frame is remarked with a remapped DSCP value. Depending on
the DP level of the frame, the remapped DSCP value is either
taken from the ' DSCP Translation->Egress Remap DP0 ' table or
from the ' DSCP Translation->Egress Remap DP1 ' table.
5.6.5 Port Policing
Policing is a traffic regulation mechanism for limiting the rate of traffic streams, thereby
controlling the maximum rate of traffic sent or received on an interface. When the traffic rate
exceeds the configured maximum rate, policing drops or remarks the excess traffic. This page
allows you to configure Policer for all switch ports.
Port Policing
Label Description
Port The port number for which the configuration below applies
Enable Check to enable the policer for individual switch ports
Rate
Configures the rate of each policer. The default value is 500 . This
value is restricted to 100 to 1000000 when the Unit is kbps or
fps , and is restricted to 1 to 3300 when the Unit is Mbps or kfps .
Unti
Configures the unit of measurement for each policer rate as kbps ,
Mbps , fps , or kfps . The default value is kbps .
Flow Control
If Flow Control is enabled and the port is in Flow Control mode,
then pause frames are sent instead of being discarded.