![ORiNG IGS-9168GP series Скачать руководство пользователя страница 122](http://html1.mh-extra.com/html/oring/igs-9168gp-series/igs-9168gp-series_user-manual_1651751122.webp)
IGS-9168GP User’s Manual
ORing Industrial Networking Corp
121
Age Period
This setting applies to the following modes, i.e. modes using the
Port
Security
functionality to secure MAC addresses:
MAC-Based Auth
.:
When the NAS module uses the Port Security module to secure MAC
addresses, the Port Security module needs to check for activity on the
MAC address in question at regular intervals and free resources if no
activity is seen within a given period of time. This parameter controls
exactly this period and can be set to a number between 10 and 1000000
seconds.
For ports in
MAC-based Auth.
mode, reauthentication does not cause
direct communications between the switch and the client, so this will not
detect whether the client is still attached or not, and the only way to free
any resources is to age the entry.
Hold Time
This setting applies to the following modes, i.e. modes using the
Port
Security
functionality to secure MAC addresses:
MAC-Based Auth
.:
If a client is denied access - either because the RADIUS server denies
the client access or because the RADIUS server request times out
(according to the timeout specified on the "
Configuration
Security
AAA
" page) - the client is put on hold in Unauthorized state. The hold
timer does not count during an on-going authentication.
The switch will ignore new frames coming from the client during the hold
time.
The hold time can be set to a number between 10 and 1000000
seconds.
Port
The port number for which the configuration below applies
Admin State
If NAS is globally enabled, this selection controls the port's
authentication mode. The following modes are available:
Force Authorized
In this mode, the switch will send one EAPOL Success frame when the
port link is up, and any client on the port will be allowed network access
without authentication.
Force Unauthorized
In this mode, the switch will send one EAPOL Failure frame when the
port link is up, and any client on the port will be disallowed network
access.
Port-based 802.1X
Содержание IGS-9168GP series
