EN
6
Press
MODE
to switch between:
• Clock mode
• Alarm mode
• Stopwatch mode
HR / KCAL MODE
HEART RATE MEASURMENT
Press
/
KCAL
to enter HR Measurement mode. Press
MODE
to return to previous mode.
NOTE
When no signals are received or the measurement is
out of range for five minutes, the receiver will automatically
return to the previous operating mode.
HEART RATE LIMITS
The heart rate limits help you determine if you are
exercising within your training zone.
• If you go above your limits
will flash
• If you go below your limits
will flash
To set the heart rate limits:
1. Press
/ KCAL
to navigate to
HR
measurement
mode.
2. Press and hold
MODE
until
appears.
3. Press
SET
to choose the lower limit, then press
MODE
to confirm.
4. Press
SET
to choose the upper limit
, then press
MODE
to confirm.
NOTE
The upper limit must exceed the lower limit. The
transmitter will adjust the ranges automatically according to
the data entered. You can also activate the heart rate limit
alert function, so the transmitter will emit a beeping sound
when the limits are exceeded.
To activate the heart rate limits alarm:
1. Press
/
KCAL
to Navigate to
HR
measurement
Mode.
2. Press and hold
/
KCAL
.
ICON
HIGH / LOW ALARM
On
No Icon
Off
TIME AND DATE
To set the time and date:
1. Press
MODE
to navigate to Clock mode.
2. Press and hold
MODE
to enter settings.
3. Press
SET
to scroll through the setting options. The
setting sequence is as follows: 12 / 24-hour time;
SE128 EN R5.indd 6
2007.7.6 10:27:35 AM
