EN
4
10.
heart rate icon, fl ashes to indicate successful
connection with the chest belt.
11.
/
Upper / Lower heart rate limits achieved
12.
low battery icon
13.
stopwatch icon
THE TRANSMITTER
The transmitter is used to count your heartbeat and
transmit the data to the receiver. To put it on:
1. Wet the conductive pads on the underside of the
transmitter with water or a conductive gel to help
establish a solid contact.
2. Strap the transmitter across the chest. Adjust the
strap until the transmitter sits snugly below the
pectoral muscles for an accurate heart rate signal.
HINTS
• The position of the transmitter affects its performance.
Move the transmitter along the strap for the best
transmission. Avoid areas with dense chest hair.
• In dry, cold climates, it takes the transmitter a while
to function steadily. This is normal, as the conductive
pads need a fi lm of sweat to improve contact with
the skin.
THE RECEIVER
The receiver comes in the format of a wristwatch.
SE128 EN R5.indd 4
2007.7.6 10:27:28 AM
