ORBECO SP600 Скачать руководство пользователя страница 68

Страница: 68 / 334

SP600 Spectrophotometer 01/2008

1.1 Methods

Chlorine, differentiated determination

with Powder Pack

0.01 – 2 mg/l Cl

1. Fill a clean vial (24 mm Ø) with

10 ml of the water sample

close tightly with the cap.

2. Place the vial in the sample chamber making sure that

the marks are aligned.

3. Press

ZERO

key.

4. Remove the vial from the sample chamber.

5. Add

one VARIO Chlorine FREE-DPD / F10 powder

pack

straight from the foil to the water sample.

6. Close the vial tightly with the cap and swirl several

times to mix the contents (approx. 20 seconds).

7. Place the vial in the sample chamber making sure that

the marks are aligned.

8. Press

TEST

key.

9. Remove the vial from the sample chamber. Empty the

vial, rinse vial and cap several times and then fill the vial

with

10 ml of water sample

10. Add

one VARIO Chlorine TOTAL-DPD / F10 powder

pack

straight from the foil to the water sample.

11. Close the vial tightly with the cap and swirl several

times to mix the contents (approx. 20 seconds).

prepare Zero
press ZERO

Zero accepted
prepare T1
press TEST

Содержание SP600















































































































































































































































































































































Результаты поиска

Содержание SP600

Отзывы:

ORBECO SP600, Инструкция по эксплуатации, Страница: 68 / 334

Результаты поиска

Содержание SP600

Отзывы: