ORBECO SP600 Скачать руководство пользователя страница 135 | Manualshive

Страница: 135 / 334

ORBECO SP600 Скачать руководство пользователя страница 135

133

SP600 Spectrophotometer 01/2008

1.1 Methods

Notes:

1. If the water sample is cloudy, you must filter it before performing the zero calibration.
2. The temperature of the water sample should not exceed 21°C.
3. Using the Hydrazine spoon: 1 g is equivalent to one level spoon.
4. Qualitative folded filter papers for medium precipitates are recommend.
5. In order to check whether the reagent has aged (if it has been stored for a lengthy
  period), perform the test as described above using tap water. If the result is above the
  detection limit of 0.05 mg/l, you should only use the reagent with reservations (major
  result deviation).
6. There is an option to change the unit from mg/l to μg/l.
  The unit mg/l is rounded, e.g.: 25 μg/l = 0.025 mg/l   display 0.03 mg/l.

mg/l

μg/l

«
...
133
134
135
136
137
...
»

Содержание SP600















































































































































































































































































































































Отзывы:

Нет отзывов