ORBECO SP600 Скачать руководство пользователя страница 50

Страница: 50 / 334

SP600 Spectrophotometer 01/2008

1.1 Methods

Chloride

with Reagent Test

5 – 60 mg/l Cl

–

Use two clean vials (24 mm Ø) and mark one as blank for
zeroing.

1. Fill a clean vial (24 mm Ø) with

10 ml of deionized

water

(this is the blank).

2. Fill the second clean vial (24 mm Ø) with

1 ml of the

water sample

and

9 ml of deionized water

(this is

the sample).

3. Fill each vial with the same size drops by holding the

bottle vertically and squeeze slowly:

3 drops Chloride-51

4. Close the vials with the caps tightly and invert the vials

several times to mix the contents.

5. Fill each vial with the same size drops by holding the

bottle vertically and squeeze slowly:

3 drops Chlorid-52

6. Close the vials with the caps tightly and invert the vials

several times to mix the contents.

7. Press

[ ]

key.

Wait for a

reaction period of 3 minutes

8. Place the vial (the blank) in the sample chamber making

sure that the marks are aligned.

9. Press

ZERO

key.

10. Remove the vial from the sample chamber.

11. Place the vial (the sample) in the sample chamber ma-

king sure that the marks are aligned.

12. Press

TEST

key.

The result is shown in the display in mg/l Chloride.

prepare Zero
press ZERO

Zero accepted
prepare Test
press TEST

Countdown
3:00
start:

Содержание SP600















































































































































































































































































































































Результаты поиска

Содержание SP600

Отзывы:

ORBECO SP600, Инструкция по эксплуатации, Страница: 50 / 334

Результаты поиска

Содержание SP600

Отзывы: