background image

20

6.0   Warranty

The manufacturer warrants to the original purchaser of this instrument that it will be free of defects in material 

and workmanship, in normal use and service, for a period of three years from date of shipment to the original 

purchaser. The manufacturer’s obligation under this warranty is limited to replacing, at its factory, the instrument 

or any part thereof.  Parts, which by their nature are normally required to be replaced periodically, consistent 

with normal maintenance, specifically lamps including fluorescent backlight, reagent, sensors, electrodes and 

fuses are excluded.  Also excluded are accessories and supply type items. 

 

 

 

   

 

 

 

 

 

 

 

 

Original purchaser is responsible for return of the instruments, or parts thereof, to the manufacturer’s factory.  

This includes all freight charges incurred in shipping to and from the manufacturer’s factory. 

 

 

   

 

 

The manufacturer is not responsible for damage to the instrument, or parts thereof, resulting from misuse, 

negligence or accident, or defects resulting from repairs, alterations or installation made by any person or 

company not authorized by the manufacturer.   

 

 

 

 

 

The manufacturer assumes no liability for consequential damage of any kind, and the original purchaser, by 

placement of any order for the instrument, or parts thereof, shall be deemed liable for any and all damages 

incurred by the use or misuse of the instruments, or parts thereof, by the purchaser, its employees, or others, 

following receipt thereof. 

 

 

 

 

 

 

 

 

Carefully inspect this product for shipping damage, if damaged, immediately notify the shipping company and 

arrange an on-site inspection. The manufacturer cannot be responsible for damage in shipment and cannot 

assist with claims without an on-site inspection of the damage. 

 

 

 

This warranty is given expressly and in lieu of all other warranties, expressed or implied.  Purchaser agrees 

that there is no warranty on merchantability and that there are no other warranties, expressed or implied.  No 

agent is authorized to assume for the manufacturer any liability except as set forth above.  Opening the main 

instrument enclosure (excluding the battery compartment) may void the warranty.

Содержание 942-095

























Отзывы: