ORBECO 942-095, Инструкция по эксплуатации

Страница: 11 / 24

11
3.0 General Operating Instructions
Before Starting to Test, Carefully Read Sections 3 Through 7
Pay attention to all notes and cautions to avoid inaccurate results or possible personal harm.
Section 7 Explains the Specific Test Procedure
Section 7 details the exact steps to follow. These include preparing a “BLANK” tube and how to use a tablet
or reagent(s) to prepare a “SAMPLE” tube for use in the General Operating Instructions described below.
The following instructions cover the general operating steps that apply to all Model 942 Mini Analyst
instruments. The sequence of steps covers how to activate the instrument, and how to go through its
automatic steps to guide you in completing each test. After you press the On/Off switch, the instrument will
automatically prompt you step by step until it displays the test result.
1. To Activate the Instrument , push the On/Off switch (
O
) on the faceplate.
The display will read:
WELCOME
ORBECO-HELLIGE
And will then display:
MODEL 942
(NAME OF TEST)
After the instrument automatically goes through its self-diagnostic steps, it will display:
INSERT BLANK
2. Insert the “BLANK” Tube . An internal micro-switch senses the presence of the tube, and
activates the instrument. The screen then reads:
READING BLANK
PLEASE WAIT
Then it prompts:
REMOVE BLANK