Orban OPTIMOD-FM 8600Si, Руководство по эксплуатации

Страница: 102 / 356

2-46
INSTALLATION ORBAN MODEL
reo Encoder Operation on page 3-11.
•
Mono From Left, Mono From Right, or Mono From Sum : switches the
8600’s stereo encoder off, using the Left, Right, or Sum (L+R) respectively,
as the program source.
•
MOD Reduction 1, or MOD Reduction 2 : reduces the program modula-
tion by the percentage programmed in the Input/output screen. When volt-
age is removed, these functions are deactivated.
•
Reset Clock To Hour
•
Reset to Midnight
•
Monitor Mute is a non-latching function that mutes the analog output if
it has been programmed to emit the monitor signal (in the
I
NPUT
/O
UTPUT
:
O
UTPUT
1
screen).
•
Analog Out Delay In : Activates the diversity delay for the analog output
if it is configured to emit the output of the analog FM processing chain (see
page 3-75).
•
Digital Out 1 Delay In : Activates the diversity delay for Digital Output #1
(Analog, Digital #1, Digital #2, Composite) if it is configured to emit the
output of the analog FM processing chain (see page 3-75). There is also a
D
IGITAL
O
UT
2 D
ELAY
I
N choice available. It is not possible to choose different
diversity delay values for the various outputs, but it is possible to turn the
delay off and on independently for each output.
•
Analog Out Delay Out: Bypasses the diversity delay for a specified output
(Analog, Digital #1, Digital #2, Composite) emitting the output of the ana-
log FM processing chain (see page 3-75).
D
IGITAL
O
UT
1 D
ELAY
O
UT
and
D
IGITAL
O
UT
2 D
ELAY
O
UT are also available
.
•
FM Polarity Positive : Makes positive the output polarity of the 8600’s FM
analog channel processing. In HD Radio installations, this command is use-
ful when switching the 8600 between transmitters if the transmitters’ ex-
citers produce opposite FM modulation polarities when driven by identical
digital audio input signals. This setting affects any output emitting the ana-
log FM processed signal, including the composite output.
•
FM Polarity Negative : (see above)
•
No Function : remote input is disabled.
3. End remote control interface programming.
When you are finished programming the remote control interface, press the Es-
cape button to return to higher menu levels.