Orban OPTIMOD-FM 8600Si, Руководство по эксплуатации

Страница: 72 / 356

2-16
INSTALLATION ORBAN MODEL
If you leave Quick Setup before you complete all of the setup screens, re-
invoking Quick Setup will return you to the screen you were on before
you left Quick Setup.
3. Set the time.
Note that if your 8600Si can be connected to the Internet via its Ethernet
jack, you can configure the 8600Si’s internal clock to sync to an Internet
timeserver. See
Synchronizing Optimod to a Network Time Server on
page 2-57. If you intend to synchronize the 8600Si’s clock to a timeserver,
you may skip setting the time, date, and daylight savings time setting
steps below. In this case, press the
Next button six times, or until “Select
Pre-emphasis with knob” appears. At this point, you will be at step 5.F) in
this Quick Setup procedure.
When you enter Quick Setup for the first time, the set time screen appears.
A) Hold down the appropriate soft button while turning the knob to enter the
hour, minute, and seconds. Enter seconds slightly ahead of the correct time.
B) Wait until the entered time agrees with the correct time. Then press the
E
NTER
T
IME
button to set the clock.
4. Set the date.
Hold down the appropriate soft button while turning the knob to enter the day,
month, and year.
5. Set up Daylight Saving Time (Summer Time).
A) After you press
E
NTER
D
ATE , you will see the
S
ET
D
AYLIGHT
S
AVING screen. Turn
the knob to specify the date at which Daylight Saving Time begins in your ar-
ea.
B) Press the
Next
button.
C) Turn the knob to specify the date at which Daylight Saving Time begins in
your area.
D) Press the
Next
button.
E) Turn the knob to specify the date at which Daylight Saving Time ends in your
area.
F) Press the
N
EXT button.
G) Turn the knob to specify the week of the month when Standard Time begins.
6. Set pre-emphasis.
A) Press the Next button.
B) Select the pre-emphasis (either 75
μ
S or 50
μ
S) used in your country by turning
the knob.